Driver Card No. CB-016S2 Driver Cards ITOH DENKI Vietnam | ITOH DENKI Việt Nam

Models Applicable

PM486FS, PM486FE, PM486FP,
PM570FE, PM605FE, PM635FS

The CB-016S2 driver card is used to control Power Moller® 24 brushless DC motorized rollers. It performs motor run/stop along with direction
functions. Speed selection via rotary switch (20 fixed speeds). Variable speed can also be controlled by an external analogue voltage
(0 to 10V). Overload protection through a built-in thermister and current limiter; error signal in case of motor overload, Switchable PNP or
NPN inputs / outputs. Acceleration and deceleration regulated using 2 potentiometers (0 Ã 2sec). Automatic or manual restart after overload
activation. The CB-016S2 can deliver a PWM (Pulse Width Modulation) by means of a magnetic pulse. Also available for rollers with built-in brakes, CB-016BS2.

Technical Document

CB-016S2 Technical Document PDF

CAD Drawing Download (.DWG)

CB-016S2 .DWG File

Power Source:

• 24VDC Battery or 24VDC Power Supply
• Battery or fullwave rectified with smoothed current <10% Ripple

Dimensions

Specifications

Electrical	• 24V DC ±10% input• 24VDC: Battery or fullwave rectified and smoothed current <10% Ripple • Power ON delay <1s • 4A locking current • Input signal level for activation 0V (3V or less) for NPN 24 V (18V or greater) for PNP • Output (error) signal Open collector 24V, 25mA or less Selectable NPN PNP • Brake Model Only 0.2s delay between stop signal and mechanical brake reaction 0.2A brake current @24V (<0.1s) Brake coil is active (disengaging brake) while motor is running
Brake	• Dynamic (Electric-Both models)  • Mechanical (CB-016S2B only)
Protection	• Thermal protection reaction  85° C (158° F) on the PCB 105° C (221° F) in the motor • Built-in 5A fuse for line current to prevent overheating • Built-in diode for incorrect wiring protection
Terminal	• 2-Pole WAGO (CN1)  (M) 734-162 (F) 734-102	• 5-Pole WAGO (CN2)  (M) 733-365 (F) 733-105
Motor Connector	• 9-Pole JST (CB0-16)  (M) S9B-XH-A (F) XHP-9 (socket terminal SXH-001P-Po.6)	• 10-Pole JST (CB0-16B)  (M) S10B-XH-A (F) XHP-10 (socket terminal SXH-001P-Po.6)
Applicable Environment	• Temperature: 0 – 40° C (32 – 104° F) • Humidity: <90% Relative Humidity (no condensation) • Atmosphere: No corrosive gasses • Vibration: 0.5G

Product Options: