Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. A-071-G2 “Hex Flat Up”

No. A-081-G2 “Hex Point Up”

Models Applicable

PM486FH

PM486 series Power Moller is supplied with two mounting brackets No. A-071-G2 (flat on top) or A-081-G2
(point on top) to match the conveyer hex hole design.

It is mandatory to fix both shafts of the unit properly with these brackets. Nut mounting torque ~ 2.2 lb-ft (3 Nm)

Fittings Document

Fittings-High Torque Product Sheet

CAD Drawing Download (.DWG)

	A-071-G2 .DWG File
	A-081-G2 .DWG File

Dimensions

Product Options:

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam

No. P-0B1 “Hex Flat Up”

No. P-0C1 “Hex Point Up”

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. P-0B1 “Hex Flat Up”

No. P-0C1 “Hex Point Up”

Model applicable

PM486FP series Power Moller is supplied with two mounting brackets No. P-0B1 (flat on top) or P-0C1 (point on top) to match the conveyer, design.

It is mandatory to fix both shafts of the unit properly with these brackets and nuts. Nuts should be torqued to 22.1 Lb.Ft. +/- 10%.

Specification Document

Fittings-High Torque Product Sheet

CAD Drawing Download (.DWG)

P-0B1 .DWG File

P-0C1 .DWG File

Product Options:

Bracket No. M-021-B Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Models Applicable

PM763BS

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

M-021-B .DWG File

Product Options:

Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. C-001

No. C-001-D (Stainless)

• This is used for the frame which does not have enough space for the No. A-200.
• Please specify which one of No. A-200 and No. C-001 is required for your frame, when ordering. In case that
• No. C-001 is specified, terminal block and safety cover are not included.
• No. C-001-D provided as a standard accessory for water-proof or drip proof version.

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

C-001 .DWG File

C-001

C-001-D (Stainless)

Product Options:

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. A-071-G “Hex Flat Up”

No. A-081-G “Hex Point Up”

Models Applicable

PM486FS, PM486FE, PM486FX

PM486 series Power Moller is supplied with two mounting brackets No. A-071-G (flat on top) or A-081-G
(point on top) to match the conveyer, design.

It is mandatory to fix both shafts of the unit properly with these brackets. Nut mounting torque ~ 2.2 lb-ft (3 Nm)

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

	A-071-G .DWG File
	C-071 .DWG File
	A-081-G .DWG File
	C-081 .DWG File

No. A-081-G “Hex Point Up”

 

Product Options:

Product Sheet: A-B70/80-G Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

• I/O terminal on mounting bracket
• Available for XE / XP series
• Speed can be adjustable from 12.5% to 100% by potentiometer
• Built-in 10 kΩ resistor for speed variation
• Green LED illuminates for 24VDC power
• Red LED illuminates for motor error
• Reverse direction using a sliding switch
• 24VDC is supplied using cable splice connectors
• RUN & DIR inputs from any 24V DC switching source

Product Sheet: A-B70/80-G  Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Terminal Block No. E-920 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Models Applicable

PM380AS, PM427AS

Terminal Blocks Document

Terminal Blocks Product Sheet

CAD Drawing Download (.DWG)

E-920 .DWG File

Features

• Standard accessory for PM380AS and PM427AS
• Please fix the output shaft by the special fitting. In case the output shaft runs freely, it causes the wires to break.
• The wiring method is the same as No. A-200.

Product Options: