Molded Extension Cables Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Specification Document

Molded Extension Cables Product Sheet

Drawing Download (.DWG)

Extension Cables .DWG File

Features:

Available only for DC Power Mollers that require extra cable length

Cables available in the following standard lengths:

-  600mm (23.62″), 1200mm (47.24″), 2200mm (86.61″) and 2700mm (106.30″)

Allows for easy hook up between Power Moller roller cable and driver card

Available in the following configurations:

- 9 pin male to 9 pin female

- 9 pin male to 10 pin female

- 10 pin male to 10 pin female

- 12 pin male to 12 pin female

Dimensions:

Snap-In-Drive (SID) Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam

Snap-In-Drive (SID) Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

1.91″ (48.6mm) Diameter (24V DC)

The SID (Snap-in-Drive) interface controller is a new generation, built-in ZPA-logic, control card. It is compatible with the SID series Power Moller® motor driven roller with internal drive card (XE / XP with cable-less option).

The SID controller design concept minimizes installation and wiring time by employing a unique mounting method.  It also has several operating modes and speed options which make the SID controller suitable for most ZPA applications, even merge and divert areas.

Features

• RoHS and EMC conformity (EN61000-6-2/1999, EN61000-6-4/2001)
• Input power voltage: DC24V ±10%
• LED indicators for Power, Sensor, and Error status
• Speed adjustable by potentiometer, 10 different settings (Interface card only)
• 4 DIP switches for operation selection (Interface card only)
• Built-in diode for reverse polarity protection
• Flexible-Zone-Recognition for product that spans multiple zones (slug release mode)

Product Sheet

SID Product Sheet

Application Document

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. A-071-G2 “Hex Flat Up”

No. A-081-G2 “Hex Point Up”

Models Applicable

PM486FH

PM486 series Power Moller is supplied with two mounting brackets No. A-071-G2 (flat on top) or A-081-G2
(point on top) to match the conveyer hex hole design.

It is mandatory to fix both shafts of the unit properly with these brackets. Nut mounting torque ~ 2.2 lb-ft (3 Nm)

Fittings Document

Fittings-High Torque Product Sheet

CAD Drawing Download (.DWG)

	A-071-G2 .DWG File
	A-081-G2 .DWG File

Dimensions

Product Options:

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam

No. P-0B1 “Hex Flat Up”

No. P-0C1 “Hex Point Up”

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. P-0B1 “Hex Flat Up”

No. P-0C1 “Hex Point Up”

Model applicable

PM486FP series Power Moller is supplied with two mounting brackets No. P-0B1 (flat on top) or P-0C1 (point on top) to match the conveyer, design.

It is mandatory to fix both shafts of the unit properly with these brackets and nuts. Nuts should be torqued to 22.1 Lb.Ft. +/- 10%.

Specification Document

Fittings-High Torque Product Sheet

CAD Drawing Download (.DWG)

P-0B1 .DWG File

P-0C1 .DWG File

Product Options:

Bracket No. M-021-B Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Models Applicable

PM763BS

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

M-021-B .DWG File

Product Options:

Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. C-001

No. C-001-D (Stainless)

• This is used for the frame which does not have enough space for the No. A-200.
• Please specify which one of No. A-200 and No. C-001 is required for your frame, when ordering. In case that
• No. C-001 is specified, terminal block and safety cover are not included.
• No. C-001-D provided as a standard accessory for water-proof or drip proof version.

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

C-001 .DWG File

C-001

C-001-D (Stainless)

Product Options:

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. A-071-G “Hex Flat Up”

No. A-081-G “Hex Point Up”

Models Applicable

PM486FS, PM486FE, PM486FX

PM486 series Power Moller is supplied with two mounting brackets No. A-071-G (flat on top) or A-081-G
(point on top) to match the conveyer, design.

It is mandatory to fix both shafts of the unit properly with these brackets. Nut mounting torque ~ 2.2 lb-ft (3 Nm)

Fittings Document

Fittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

	A-071-G .DWG File
	C-071 .DWG File
	A-081-G .DWG File
	C-081 .DWG File

No. A-081-G “Hex Point Up”

 

Product Options: