Thứ Tư, 2 tháng 7, 2014

Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam

c-001

Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. C-001

No. C-001-D (Stainless)

  • This is used for the frame which does not have enough space for the No. A-200.
  • Please specify which one of No. A-200 and No. C-001 is required for your frame, when ordering. In case that
  • No. C-001 is specified, terminal block and safety cover are not included.
  • No. C-001-D provided as a standard accessory for water-proof or drip proof version.

Fittings Document

PDFFittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

PDFC-001 .DWG File

C-001

C-001-D (Stainless)

Product Options:

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam

a-081

Mounting Bracket Fittings ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

No. A-071-G “Hex Flat Up”

No. A-081-G “Hex Point Up”

Models Applicable

PM486 series Power Moller is supplied with two mounting brackets No. A-071-G (flat on top) or A-081-G
(point on top) to match the conveyer, design.
It is mandatory to fix both shafts of the unit properly with these brackets. Nut mounting torque ~ 2.2 lb-ft (3 Nm)

Fittings Document

PDFFittings-Standard Torque Product Sheet

CAD Drawing Download (.DWG)

PDFA-071-G .DWG File
PDFC-071 .DWG File
PDFA-081-G .DWG File
PDFC-081 .DWG File

No. A-081-G “Hex Point Up”

 

Product Options:


Product Sheet: A-B70/80-G Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

A-B70-80-G
  • I/O terminal on mounting bracket
  • Available for XE / XP series
  • Speed can be adjustable from 12.5% to 100% by potentiometer
  • Built-in 10 kΩ resistor for speed variation
  • Green LED illuminates for 24VDC power
  • Red LED illuminates for motor error
  • Reverse direction using a sliding switch
  • 24VDC is supplied using cable splice connectors
  • RUN & DIR inputs from any 24V DC switching source

Terminal Block No. E-920 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

E-920

Terminal Block No. E-920 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Models Applicable

Terminal Blocks Document

PDFTerminal Blocks Product Sheet

CAD Drawing Download (.DWG)

PDFE-920 .DWG File

Features

• Standard accessory for PM380AS and PM427AS
• Please fix the output shaft by the special fitting. In case the output shaft runs freely, it causes the wires to break.
• The wiring method is the same as No. A-200.


Product Options:

Terminal Block No. A-800 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

A-800

Terminal Block No. A-800 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Wiring time is drastically slashed.

Models Applicable

Terminal Blocks Document

PDFTerminal Blocks Product Sheet

CAD Drawing Download (.DWG)

PDFA-800 .DWG File

Advantages:

• It is not necessary to cut off or strip any wires.
• No terminal connection is required, which drastically slashes wiring time.
• No slack in wiring.

Order:

The fitting No. A-800 is an optional item and no Power Moller® is provided with this fitting as standard.
Please order it separately when ordering Power Mollers® and the No. A-800 will be delivered instead of No.
A-200 at an extra cost.
 

Dimensions


Product Options:

No. A-270-GS / A-280-GS Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

NO.A-270-GS

Terminal Block

No. A-270-GS / A-280-GS Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Model Applicable

The PM486BS is supplied with either the A-270-GS (flat on top) or the A-280-GS (point on top) terminal block to match the conveyor frame hole design.
Each output shaft should be fixed by the applicable fitting. In case output shaft turns freely it will cause the wires to break.

Terminal Blocks Document

PDFTerminal Blocks Product Sheet

CAD Drawing Download (.DWG)

PDFA-270-GS .DWG File
PDFA-280-GS .DWG File

A-270-GS Hex Flat Up

A-280-GS Hex Point Up

Product Options:


Terminal Block No. A-200 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam

A-200

Terminal Block No. A-200 Terminal Blocks ITOH DENKI Vietnam | ITOH DENKI Việt Nam 

Models Applicable

Terminal Blocks Document

PDFTerminal Blocks Product Sheet

CAD Drawing Download (.DWG)

PDFA-200 .DWG File
• Provided as a standard accessory for each applicable model.
• Each output shaft should be fixed by the applicable fitting. In case out-put shaft turns freely, it causes the wires to break.
• The mounting hole and stud portion of Fixture 1 are eccentric, which lets Fixture 2 slide down onto the stud of Fixture 1 to fasten the output shaft tightly.
 

Product Options: